Drafty House in Hamilton? How to Stay Warm This Winter Without Overworking the Furnace

batts

Hamilton has some of the oldest housing stock in the region. Brick homes in the lower city, century houses in Durand and Kirkendall, and post-war bungalows up on the Mountain all bring character, and drafts. If you can feel cold air near the baseboards, see the curtains move on a windy night, or hear the furnace running almost nonstop, your home is telling you where the heat is going.

Here’s how to make a drafty Hamilton home warmer without wearing out your furnace.

Drafts Are a Symptom of Air Leaking Out Up Top

Most people think of drafts as cold air leaking in. That’s true, but the reason it comes in is that warm air is leaking out somewhere else, usually through the attic. As heated air rises and escapes through the ceiling, it pulls cold air in through the basement, windows and doors. This is called the stack effect. Plug the leaks at the top and many of the drafts at the bottom ease off on their own.

1. Seal and Insulate the Attic

In older Hamilton homes, the attic is often the weakest part of the house. Insulation may be a few inches of old material, or there may be large gaps around chimneys, wiring and plumbing that let warm air pour straight out.

Attic insulation in Hamilton is usually the most effective place to start. Ontario’s attic rebate program targets R-50, which takes roughly 13 to 15 inches of blown-in cellulose or 17 to 19 inches of blown-in fibreglass. Cellulose is denser and better at slowing air movement, which makes it a good match for leaky older attics.

Before topping up, make sure:

  • Old insulation that’s wet, mouldy or full of rodent debris is removed through attic insulation removal.
  • Soffit vents are kept open with baffle installation so the attic stays dry.
  • Obvious gaps around chimneys and stacks are sealed with appropriate materials.

2. Insulate the Walls

Many older Hamilton homes have little or nothing inside the exterior walls. That’s why some rooms feel cold even with the furnace running. Drill and fill insulation blows insulation into closed wall cavities through small holes, with no need to remove plaster or drywall.

3. Seal the Basement and Rim Joists

Old stone and block foundations, rim joists and basement windows let in a lot of cold air. Spray foam insulation seals and insulates these areas at the same time, which helps stop the draft at its source.

4. Whole-House Air Sealing

If your home has leaks everywhere, sealing them one by one can feel endless. AeroBarrier air sealing seals gaps across the whole house from the inside in a single visit.

5. Quick Fixes for This Weekend

  • Add weatherstripping to the attic hatch and exterior doors.
  • Install foam gaskets behind outlets and switches on exterior walls.
  • Use window film kits or heavy curtains on drafty older windows.
  • Close the fireplace damper when it isn’t in use.
  • Check and replace your furnace filter.

For a detailed look at how heat moves through a house, Natural Resources Canada’s free Keeping the Heat In guide is a useful reference.

Help Paying for It

The Home Renovation Savings attic rebate pays up to $1,250 for bringing an attic up to R-50 with no energy assessment. The work must be completed by a participating contractor. For drafty older homes that need several upgrades, the assessment-based path can be worth more: up to $7,700 across attic, wall, foundation and floor insulation, plus air sealing rebates. Gas-heated homes must be Enbridge Gas customers. The program is extended to November 30, 2026, but it can end at any time. See our Hamilton rebate page.

Frequently Asked Questions

Why is my old house so drafty?

Older homes usually have more gaps and less insulation. Warm air escapes through the attic and pulls cold air in through the lower parts of the house, which you feel as drafts.

Is drill and fill insulation safe for older homes?

When it’s done properly after an assessment, yes. An installer will check the wall cavities and any wiring concerns before starting.

What should I do first in a drafty home?

Start with the attic: seal the leaks and bring the insulation up to R-50. Then move to the basement and walls.

Warm Up Your Hamilton Home

Pro Insulation Contracting will find your home’s biggest leaks and recommend the fix that makes sense. Book a free assessment or call (416) 315-0471.

Share the Post:

Related Posts

Get a Free Quote Today!

Insulation Rebate Up To $7,700